JessEm stock guides for table saw setup, use, and fit
A practical guide to JessEm Clear-Cut table saw stock guides, including how the angled rollers work, where TS and STS models differ, and what to check before installation.
Read More
Wednesday, September 2, 2026
Guides
Laguna bandsaw guides explained for setup, blade choice, and replacement
A practical guide to Laguna bandsaw guides, covering ceramic guide setup, blade-width considerations, replacement signs, and common troubleshooting checks.
Read More
Router table roller guides explained for steadier stock control
Router table roller guides help keep a workpiece pressed down and against the fence as it passes the bit. This guide explains how they work, where they help, and what they do not replace.
Read More
Roller guides for sawmill blade control, adjustment, and troubleshooting
Roller guides support a bandsaw mill blade close to the cut, but they cannot make up for dull blades, poor tension, or wheel misalignment. This guide explains setup order, common symptoms, maintenance checks, and when an upgrade is worth considering.
Read More
How to choose the best bandsaw guides for your saw
The best bandsaw guides depend on your saw, blade width, cutting material, and setup habits. This guide compares bearing, ceramic, graphite composite, carbide, and steel guide options for safer, cleaner, more predictable cutting.
Read More
DIY bandsaw guides for better blade control and safer setup
DIY bandsaw guides can improve blade control when they are built around proper alignment, guarded operation, and realistic limits. This guide explains guide blocks, bearings, thrust support, setup order, materials, and troubleshooting without treating a homemade part as a substitute for a safe machine.
Read More
Are DIY Bandsaw Guides Worth It for Cleaner Cuts?
A shop-floor look at DIY bandsaw guides, covering guide parts, block and bearing materials, setup order, blade choice, and safety checks for cleaner cuts in wood, plastic, and light metal.
Read More
Is Installing Carter Bandsaw Guides Worth It for Cleaner Bandsaw Cuts?
Practical shop notes on installing Carter bandsaw guides, setting side bearings, checking thrust bearings, and test-cutting before normal work.
Read More
Are Bandsaw Mill Roller Guides the Secret to Straighter Lumber?
Bandsaw mill roller guides help keep the blade steady near the cut, which can mean straighter boards, cleaner faces, and less blade trouble. This guide covers how they work, how to set them, and when an upgrade makes sense.
Read More
Are Bandsaw Ball Bearing Guides Worth It for Cleaner Cuts?
Ball bearing guides help keep a bandsaw blade steady, cut down rubbing, and make setup more repeatable. They still cannot make up for a dull blade, poor tracking, or bad tension, so this guide explains when the upgrade makes sense and how to set the bearings correctly.
Read More